The sump pump is one of those necessary things that you don’t think about until you need it. It’s commonly discovered in a sump pit in the corner of your basement. Its purpose is to remove water accumulated in the cavity due to floods. That means it’s critical to keep it in good operating order so it can do its job and protect your property from water damage. Fortunately, HydroHelp911 offers professional Basement Sump Pump Installation, so you can rest assured that you are always safe.
The most incredible option is HydroHelp911. We’ve been maintaining and installing pumps in homes and businesses for many years, so we know what the demands are to get the job done correctly. But, unfortunately, there is no time to spend when it comes to protecting your house against water damage.
Your house is one of your most invaluable assets, yet it might be damaged if it floods. Don’t let this happen to you since our team at HydroHelp911 has you covered! We offer free estimates. Let us handle your Basement Sump Pump Installation because you’ve got enough to worry about. By contacting us today, we can ensure that nothing terrible happens to your home.
What Is the Importance of Sump Pumps?
Sump pumps can differ between a dry basement and one exposed to excessive dampness and water. A mechanical pump and a float switch are the two main components of sump pumps. The sump pit, which is located on the lowest level of a home’s basement, is where the pump is installed.
If water infiltrates the basement, the water level rises, causing the switch to increase. When the device detects and indicates a change in water levels, it will automatically turn on, safeguarding your property without your intervention.
Is a Sump Pump Required?
If you’ve ever had a basement flood, it’s probably worth your time to think about getting a sump pump installed. Sump pumps are a significant advantage in newly constructed homes because of their capacity to quickly drain large amounts of water:
- In the vicinity of rivers or streams
- On the ground where the water table is high
- Freeze-thaw cycles are typical in climates with frequent freeze-thaw cycles.
- On soil that does not drain well
- Where quickly melting snow and ice are common
- Where heavy torrential rains take place
By pushing water up and out, away from the home’s basement, a sump pump can help to substantially limit or mitigate the amount of damage to a basement and its contents. So sump pumps have demonstrated effectiveness that some insurers now require as a flood insurance contingency.
Sump Pump Installation & Replacement
Submersible and pedestal pumps are the two types of sump pumps offered to homeowners. Both have benefits and drawbacks, but they will move water up and out of a basement. Although pedestal pumps are less expensive, submersible pumps are the best alternative for homeowners concerned about noise pollution.
A sump pit in the basement foundation is required for sump pump operation. This will necessitate a jackhammer if the basement is not a dirt-floor crawl area. In addition, it’s critical to set the sump pump basin far enough away from the wall to accommodate the foundation footing. For this reason, we do not suggest this Basement Sump Pump Installation as a DIY project.
Once sliced through the foundation, the pit must be dug long enough to accommodate a prefabricated sump pump basin. Once the basin is installed, a technician will install the pump and discharge line, regulating water up and out of the foundation or crawl space. This necessitates drilling a second hole through the home’s exterior wall. Finally, the sump pump must be connected to a GFCI outlet, and an extension cord should never be used with a sump pump.
While you can buy sump pumps, sump basins, and all the tools you’ll need to install them yourself, we recommend hiring a professional. This method, if done incorrectly, might result in long term foundation issues.
Watch the HydroHelp911 video on the water in the basement.
Sump Pump Repair
Like any other home device, a sump pump might break down over time. A sump pump used regularly will experience more wear and tear than the one used less frequently. Four frequent sump pump issues necessitate repair and replacement in some cases. They are as follows:
In the sump basin, there is debris. Debris in the sump basin might cause issues with the sump pump, causing it to break or malfunction. An impeller that has been stuck. Waste getting into the pump can cause the impeller to clog, causing the basin to flood.
A float that isn’t working correctly. The float rises with the water levels in the sump basin, which activates the pump. The sump basin is at risk of flooding if the float does not grow adequately issues with electrical connections. The sump pump will not function if there is an issue with the electrical cable, motor, or GFCI outlet, allowing the basin to flood.
HydroHelp911 has been trained to identify and repair typical sump pump problems. HydroHelp911 is the company you call if your sump pump needs to be serviced. Make an appointment via call.
Choosing the Right Sump Pump
You might not consider a sump pump to be essential. However, if your basement is prone to flooding, installing the proper sump pump can save you the stress, money, and effort that comes with dealing with water damage. Every home is different, so if you’re unclear which unit is best for your needs and budget, call HydroHelp911 for assistance. When it comes to choosing a team, your local sump pump replacement expert will go over the following points with you:
- What difference is between a pedestal sump pump and a submersible sump pump?
- Is it better to use an automatic or manual system?
- Horsepower ranges from 1/4 to 1+.
- The flow of release (gallons per hour)
- Water level sensor type (float switch or pressure switch)
- The unit’s power source usually a hardwired connection to the house
- There’s a need for a backup system and a sump pump battery backup with an alarm.
- Local code regulations regarding the release of the wastewater
Benefits of Sump Pump
You might easily have over a foot of flooding if severe rains cause your basement to flood. If you keep anything precious in the basement, this might be disastrous. Fortunately, a properly functioning sump pump can prevent this issue. Sump pumps effectively deal with slow moving floods, but they shine when it comes to large scale flooding.
Mold is likely to form in a basement with stagnant puddles of water and a moist environment. A good sump pump helps keep your basement dry, preventing the formation of mold and mildew.
Installing a sump pump in your property will help you maintain its value while preventing water damage to the structure. As a result, boost the value of your home. Even if the water does not produce fire, the harm caused by the water will ruin your electrical components. A sump pump can keep your devices safe from water damage and help you avoid a fire.
You deserve to have peace knowing that if something goes wrong with your system, HydroHelp911 will be there as promptly as possible to fix it right the first time. So please don’t put it off until it’s too late; contact HydroHelp911 now!
What Happens if The Sump Pump isn't Working?
If you don’t have a functioning and working sump pump, the extra water from a severe storm will begin to collect at the lowest point in your home. That location could be the foundation, crawlspace, or basement. Water will deform wood, cause rot, and contribute to mold growth regardless of where it settles.
If you have a power cut, your sump pump may stop working. You can achieve this with a backup battery, generator, or even a backup sump pump. Your surroundings will dictate which one you choose. For example, a second sump pump may be helpful if you get a lot of rain.
What Kind of Pump Should I Install?
Property owners can choose between two types of sump pumps. They both have a lot of advantages.
Submersible Unit
- Usually drains water more quickly.
- It’s possible to submerge it in water.
- They will last longer and are durable, making them ideal for homes where the sump pump will be used frequently.
Pedestal Pump
- The pump’s motor is mounted on a raised pedestal.
- It is not possible to submerge it in water.
- The unit’s modest flow rate makes it appropriate for families that only need it for preventative measures.
What Should the Price of a Sump Pump Installation Be?
A sump pump installation typically costs between $638 and $1,982, or $1,256 on average. Submersible sump pumps cost $100 to $400, while pedestal sump pumps cost $60 to $170. The installation will cost between $45 and $200 per hour.
