Water damages in the crawl space of the home always raise concerns about mold growth. Crawl spaces in Hickory, NC and surrounding areas are more susceptible to water damages as the crawl spaces come in direct contact with the earth’s soil.
The chances of mold growth are higher when the crawl spaces are not encapsulated. Suppose the owner wants to get rid of the mold growth. In that case, you must contact a waterproofing expert for crawl space inspection and removal, like HydroHelp911, to determine the cause of the problem and recommend the best resolution to it.
What are the Causes of Crawl Space Mold?
Poor quality construction material, water leaks, and water accumulation due to faulty drainage, poor design of structures, and insufficient ventilation are some of the reasons that lead to the crawl space moisture build-up and thus the development of mold in the space.
HydroHelp911 has a team of expert crawl space mold removal and encapsulation services in Hickory, NC, who will inspect your space for the mold problems and identify the causes to suggest a proper remedy according to their findings.
If your house is experiencing mold growth, there is a presence of water in the house. The growth and development of molds in the crawl space directly result from moisture present in the room. It is difficult for home owners to easily reach the crawl space for regular checkups and maintenance; hence, this housing area is often overlooked.
Below is a list of a few reasons for moisture presence in the crawl space that gives rise to mold growth:
- Presence of humidity – which is above 55% in the crawl space
- Flooding
- Water leaks
- Improper venting system
- Lack of air circulation
Contact HydroHelp911 for crawl space mold inspection and removal services in Hickory, NC, if you face these crawl space moisture problems.
Crawl Space Mold Removal Process
PHASE 1:
Inspection:
The waterproofing expert technician at HydroHelp911 will visit your location to inspect the crawl space visually. After the review is complete, the technician will identify the causes of the moisture and mold presence problem and determine a suitable solution.
Mapping:
During the HydroHelp911 crawl space mold inspection process, the technician will map the crawl space where moisture and dampness are present. The source of the moisture needs to be located.
With the help of equipment like a moisture meter, the HydroHelp911 crawl space mold removal expert will check the moisture content of the structure of your building. There are some places (like the foundation) where the presence of moisture may go unnoticed. A moisture meter will help us detect such hidden areas.
Crawl Space Mold Testing:
The crawl space inspection team will do air and surface quality tests which will provide results that will prove whether or not there is mold present in the room. If mold is present in the crawl space, the test results will make it convenient to design solutions to solve the crawl space mold issues.
PHASE 2:
Phase 2 of the crawl space mold removal process by HydroHelp911 begins after mold in the room is detected. The phase starts with addressing the water source, and it is a crucial step to getting rid of the origins of water before fixing the mold issue. If the water sources are not specified, the molds will grow again even after cleaning them off.
The HydroHelp911 team of the crawl space removal process will complete phase 2 by cleaning the crawl space area, clearing the organic materials like sheet rock and wood and eradicating the sources of water and moisture. The crawl space areas are washed and dried entirely in this phase.
PHASE 3:
After cleaning and drying the crawl space in phase 2, the HydroHelp911 mold removal team will eliminate the mold. The crawl space mold removal is done in 2 steps by the HydroHelp911 team:
- Spray Cleaning
- Using Biocide
After the crawl space treatment, the mold removal process is completed by experts in HydroHelp911; the crawl space is free from molds now. The next step we suggest is the installation of dehumidifiers which will help protect your house from future outbreaks. Dehumidifiers help in maintaining the moisture level in the crawl space. Owners can also install ventilators in the crawl space for the same effect.
Did You Know?
Mold is a fungus that can travel through the air. The mold can exist in both open and closed spaces. For example, the molds can enter your home through open windows, doors, and air vents.
Molds overgrow when exposed to water and humidity. Therefore, the humidity level must remain below 50% in the room.
A musty odor signals that mold is present in the room. The mold, at times, is not easily spotted by naked eyes; hence a smell will signal you the mold presence.
On average, crawl space mold removal procedures by HydroHelp911 will take anywhere from 1 day to 5 days, depending on the amount of mold present.
Why Choose HydroHelp911 for Crawl Space Mold Removal
If you face issues related to moisture and water in the crawl space of your home or building, you should contact crawl space repair experts.
HydroHelp911 has a specialized team of crawl space mold removal services in Hickory, NC, who use the latest techniques and equipment that provide the best and most efficient results for your crawl space moisture issues.
HydroHelp911 focuses on delivering the best and top-quality crawl space services. Contact HydroHelp911 today for a free crawl space mold removal inspection in Hickory, NC.
What is the difference between mildew and mold?
One of the best indications that differentiate the mold and mildew is the color. The color of the fungi will tell whether it is mildew or mold. Mildew has a grey or a whitish color. The texture of the mildew fungi is of a flat pattern and can easily be cleaned with a household brush or a cleaner. On the other hand, mold is either black, green, or yellow, and the texture is fuzzy. Mold has a tendency to be more harmful to the house and your family’s health.
Can painting over the mold solve the issue?
Painting over the mold that has grown in the crawl space of your house will lead to hiding the problems rather than solving them. The mold will continue to grow over the paints and primers on the wall. To fix the problem of crawl space molds, you must eliminate the room’s water and humid air source. HydroHelp911 will evaluate and inspect your home for crawl space mold removal in Hickory, NC and provide the following services for mold prevention:
- Crawl Space Encapsulation Services
- Waterproofing and Structural Repair Services
- Installation of Dehumidifiers in the Crawl Space and other moisture control solutions
- Foundation Repair Services in Hickory, NC.
How does mold cause harm to the health of the human?
Inhaling air consistent with mold and the bacteria it produces will create health issues for humans. Some of the symptoms of inhaling mold are:
- Red and watery eyes
- Blocked or runny nose
- Skin rashes
- Sore throat
- Dry cough
- Sinusitis
Is it necessary to do a mold test during the purchase of a new home?
HydroHelp911 strongly recommends doing a mold and moisture test of the home by a certified contractor. The reason to do a mold test of the house is that mold indicates moisture presence. If moisture is present in the room, there are high chances of structural damages and other effects of mold damages which may not be suitable for the people living in that house. HydroHelp911 specializes in crawl space mold removal and encapsulation services in Hickory, NC.
What are the familiar sources of mold?
Molds are a direct result of the presence of moisture in the crawl space. The moisture provides ideal conditions for mold growth. Some of the familiar sources of mold are:
Basements are susceptible to flooding and water accumulation because of their location. The cellars are located below the ground surface at the foundation of the house. That makes it come in direct contact with the surrounding wet soil. Hence there are enough reasons for moisture growth in this space which gives rise to molds.
Crawl Spaces are another perfect breeding ground for mold development. If crawl spaces are not encapsulated well and not sealed properly, the site will consistently remain wet, giving rise to molds.
