Flooding and heavy rain can cause chaos in your crawl space. HydroHelp911 considers crawl space water removal critical because moisture can cause mold and damage your insulation and foundation.
The most straightforward approach to crawl space water removal is, of course, to avoid it in the first place. Although most water damage in your home’s crawl space is preventable, it does occur regularly in Gastonia, NC homes which need to be taken care of.
Many factors go into removing water from your crawl space. However, even the most daring DIY enthusiasts will struggle to complete it. To drain excess water, dry the damaged area, and remove things like mold and odor, science-backed cleaning techniques and specialized equipment are required.
Crawl spaces are an essential part of any home. They can be used for cooling, heating, and storage. Having a crawl space can provide numerous benefits, but it is critical to properly carry out the crawl space water removal process. HydroHelp911 crawl space water removal contractors will provide Gastonia, NC residents with efficient work results.
Crawl Space Water Removal Remedies by HydroHelp911
- Prevent additional water from entering- The first step is detaching the leak and keeping more crawl space water from accumulating as standing water beneath the house. Next, turn off all water and investigate which pipe is causing the flood in the crawl space.
- Using a portable sump pump to drain- You will need a portable sump pump. Install the sump pump by HydroHelp911 at the crawl space’s base, pass the drain hose into the garden, and turn it on!
A small crawl space sump pump installed by HydroHelp911 can remove standing water in around an hour (this depends on the area size of the crawl space). One aspect to note is where you are draining the water; you cannot drain the water into your garden in some areas. Instead, place the pump in the lowest part of the crawl space and leave it running till all of the water has been poured out.
- Remove any remaining moisture with a dehumidifier and crawl space vapor barrier- A sump pump will eliminate the majority of the water, but not all of it. A HydroHelp911 dehumidifier or vapor barrier will remove any remaining water, restricting mold growth in the coming years. To avoid long-term water damage problems, use a vapor barrier and consider installing a crawl space dehumidifier.
Check the video by HydroHelp911:
- Place a crawl space french drain and sump pump- In some parts of the country, your crawlspace (like your basement) will frequently flood, necessitating the installation of a long-term waterproofing solution. The most reliable way to check standing water, flooding, and water contamination is to install a sump pit and sump basin.
A crawl space drainage system by HydroHelp911 is intended to drain excess moisture from a wet crawl space. A submersible sump pump will speedily drain any groundwater through a drainpipe, much like a flooded basement.
With HydroHelp911 crawl space water removal services, you can avoid structural damage and health issues.
When your crawl space floods, the Environmental Protection Agency (EPA) recommends that you remove any water-damaged materials and debris as soon as possible and dry it out; by taking up the crawl space water removal services by HydroHelp911 as quickly as possible, you can reduce water damage and save money on crawl space restoration.
Flooding and rain cause more than just chaos; they can also cause structural damage and exacerbate health problems. Moisture provides an ideal environment for mold, bacteria, and virus growth. Furthermore, any flood water that seeps into your crawl space is tainted with pesticides, fertilizers, bacteria, and other pathogens.
Don’t jeopardize your home or family. If your home in Gastonia, NC, floods, contact crawl space water removal specialists HydroHelp911. We want to restore your crawl space in Gastonia, NC, and help ensure that your home is secure.
Why Choose HydroHelp911?
We’ll figure out what’s causing the issue in your crawl space in Gastonia, NC, and work with you to find the best solution. Our in-house crawl space water removal experts at HydroHelp911 Foundation Repair and waterproofing company in Gastonia, NC, have warranted solutions for crawl space or basement water issues and foundations of all types.
Contact HydroHelp911 today for a free crawl space inspection in Gastonia, NC, and we will help you instantly restore your basement, crawl space, and all other queries.
How are sump pumps installed?
The Sump pump installation by HydroHelp911 is done in the following way:
- Take out the Vapor Barrier- If your crawl space already has a plastic vapor barrier, the sump pump installation team of HydroHelp911 will remove it, roll it up, and remove it through the access door.
- Excavate the trench- Using the foundation as a guide, the team will dig a trench around the entire interior foundation. A usual trench will be 18 inches deep and 9-12 inches wide, with a one inch per ten foot slope. The trench is generally 8 to 24 inches deep from the foundation. If the trench is closer to the foundation, it can weaken both the foundation and the house itself.
- Install the Drain Pipe- In the trench, lay the perforated drain pipe. This will assist in collecting water and directing it to the area where the sump pump will work.
- Fill the trench with gravel- In the trench, cover the drain pipe with drain rock filling.
- Spread the soil- Distribute any remaining soil from the trench digging evenly around the crawl space.
- Set up the Drain Pipe-The perforated drain pipe in the trench is laid. This will help collect water and direct it to the area where the sump pump will operate.
- To fill the trench, gravel should be used-The drain pipe is covered with a trench with drain rock filling.
- Distribute the Soil- Distribute any remaining trench digging soil evenly around the crawl space.
- Set up the Ventilation- New vents in the crawl space’s exterior wall are installed where cross ventilation is insufficient. In addition, electric ventilation fans may be installed in vast areas to allow for cross-ventilation.
When and why are the vapor barriers installed? Which is the better option – vapor barrier or crawl space encapsulation?
You have two options after installing the water drainage system: install a new vapor barrier or encapsulate the crawl space.
Essentially, you have a third option: you can do neither. However, HydroHelp911 strongly advises you to do one of the two waterproofing remedies. A vapor barrier is the most basic option; the plastic liner will help keep moisture, gasses, and vapors out of the crawl space.
However, encapsulation is the best option. Encapsulation has three distinct benefits:
- The unpleasantness that evaporates from the ground will prevent entering the air you breathe by encapsulating your crawl space.
- It keeps moisture out of your wooden flooring structure, which causes mold and decay.
- It increases the efficiency of your home’s HVAC systems, prolonging their life and saving you money on monthly energy bills.
A much heavier liner is used in encapsulation than in a vapor barrier. The vapor barrier plastic is 3-6 millimeters thick and has a lifespan of 5-10 years. The white cap is 20 millimeters wide and has a lifespan of 25 years.
The encapsulation liner entirely encloses the crawl space, and all seams are sealed. This liner is also passed up the walls and filled with spray foam insulation to the wooden flooring structure. You must install a dehumidifier if you encapsulate your crawl space.
Does the insulation meet the specifications?
Thermal insulation in the walls of a conditioned and unvented crawl space is required. This is particularly important if you plan to use a Class I vapor retarder to encapsulate the floor and walls. Insulation amongst the joists on the floor above the crawl space does not need to be installed by a contractor. Because it keeps the crawl space dryer and warmer, wall insulation outperforms floor insulation.
Insulation prevents interior air from coming in contact with cold surfaces, preventing condensation. As a result, mold and moisture problems are avoided, and energy inefficiencies are reduced. There are many diverse types of insulation, but the best insulation is made of foam and is resistant to water. In addition, airtight insulation is required to prevent mildew growth.
What are French drains?
French drains are a precautionary measure that can help keep your crawl space dry. A French drain is defined by waterproofing expert HydroHelp911 as “a trench in the ground, inset with a perforated pipe beneath a layer of gravel.” This pipe directs stormwater away from where you don’t want it say, along the foundation and accumulates it in a more desirable location.
French drains will assist you in diverting water away from your crawlspace. Make a slight incline in the direction you want the water to flow.
