When considering your home’s waterproofing maintenance, you might want to think about buying and installing a sump pump. A HydroHelp911 basement sump pump is a device that removes any water that has accumulated in a home’s basement. A sump pump is helpful in areas where flooding is common because it can be used to quickly remove the water, saving you thousands of dollars in potential home repairs. Of course, before you begin looking into sump pump installation, you must understand everything there is to know about the equipment. Without appropriate tools, the house will flood, causing significant damage.
If you’ve been ignoring water problems in your basement, there’s a good chance you’re losing up to half of your home’s living space. And, given the current cost of housing, that’s a significant loss. While water in a basement can come from various sources, almost all these issues can be resolved. The most obvious solution is to install a sump pump in the basement for many. While a pump does not cure the waterproofing issue, it does help to deal with the symptoms.
Basement Sump Pump Installation Process by HydroHelp911
Step 1: Adding a Drain to a Sump Pump
Only after the floor around the edge has been jack hammered up is a layer of a clean stone laid down.
On top of the stone, the second layer of stone is laid down. The intent of this is to direct water from the basement wall-floor joint to the sump pump that has been installed.
The drains include a wall spacer that stretches up the basement wall to fetch water that may leak through the walls, and they are all installed by basement sump pump installation company HydroHelp911 in Shelby, NC. If your home has concrete block walls, drill the blocks to drain surrounding water into your perimeter drain.
Step 2: Installation of a Sump Pit with a Liner
A sump pump pit is also excavated to house the pump. The sump pit should not be too big, but it must be large enough to function correctly. For example, when a sump pump is placed in a small hole, it can pump water out quicker than it can occupy the liner, causing it to turn on and off speedily and heat up sooner.
When sump pits are too large, they pull up water far below your home, deliberately causing work and power consumption.
The sump pump has permanently been installed at the basement’s lowest point. The water will flow easily toward the sump pump and be pumped away this way.
Step 3: Installing the Sump Pump
In the basement sump pump installation process by HydroHelp911, a line of PVC pipe is installed from the perimeter drain directed to the sump pump system, and gravel is filled up all around the sump pump liner. This gravel prevents mud and debris from accumulating against the sump pump.
It is mounted on a unique stand inside the liner to prevent sand and soil particles from entering the pump.
An airtight sump pump cover keeps odors and moisture from soaring out of the sump pit and enables the sump pump to run at a much quieter rate.
The Sump Pump System will include two pumps installed in the liner and two discharge lines to ensure that the pipes can manage the amount of water sent through them.
Step 4: The sump and drainage line system are tested.
The system is checked before repairing the floor to determine operationally sound and make necessary adjustments.
The outside is also inspected to ensure that water is being released to the proper location from the discharge line.
Inspection ports will be installed in the system, which will make it easy to drain a dehumidifier or check and flood test the system.
Step 5: The final touches.
The concrete floor is repaired flush for a clean and appealing appearance to finish the sump pump installation.
Unlike other basement waterproofing systems, we do not leave a gap around the perimeter of the floor to collect dust, debris, and other particles that could clog your waterproofing system.
The discharge line is submerged beneath the ground outside your home. HydroHelp911’s basement sump pump installation team in Shelby, NC, takes care to remove sections of the yard in whole pieces before uncovering to induce as minor damage to your landscaping as possible during the installation.
Step 6: Basement Improvements
Once your basement has been protected from flooding, it’s an excellent opportunity to make use of the space and make a cleaner, drier, more appealing environment.
Inquire about HydroHelp911‘s basement sump pump installation processes, French drain systems, and other waterproofing systems in Shelby, NC.
According to waterproofing experts, installing a basement sump pump, HydroHelp911, is an essential part of maintaining your basement or crawl space dry. Sump pumps are kept in the lowest area of the room to remove water that has accumulated in the sump pit. Water can be a severe issue in many homes, but not all are equipped to deal with it.
Basement waterproofing experts, HydroHelp911, can assist you with sump pump installations and replacements to keep your basement or crawlspace dry in the USA. Installing a sump pump is one of the most prudent things you can do to protect your home from flooding or other water issues.
Know about Basement Waterproofing. Watch this video.
Can I install a sump on my own?
Installing a sump pump is not a do it yourself project. Several intricate elements are pivotal to the survival of your sump installation and your cavity drainage system overall.
It makes sense to have a sump installed by a professional basement waterproofing company we strongly advise using an eligible basement waterproofing contractor.
What are the pedestal sump pump and submersible sump pump?
As the name specifies, a submersible pump is installed underwater in the sump pit. In addition, a pedestal pump is installed above the sump pit, with the pump motor elevated above the water.
Submersible pumps are popular because they take up little space, produce little noise, and pump water faster than pedestal pumps.
Pedestal sump pumps are less expensive for homeowners who choose them. They also last longer since the motor is not submerged in water.
The pedestal pump may be a better option if you have a smaller sump pit. You could also consider a combination sump pump with a battery backup.
How much water can sump pumps eliminate?
This is an excellent question, and it is dependent on the pump installed in your home. Most homes have builder-grade sump pumps and could benefit from HydroHelp911 basement Sump Pump installation. Our waterproofing team will assist homeowners in determining which type of pump they have in their homes.
Installing a sump pump in the United States is a wise decision for homeowners. It not only helps to keep your belongings safe, but it also helps to protect the structural integrity of your home and avoids the inconveniences caused by water damage.
What happens if the power goes out on my sump pump?
We always recommend sump pumps with battery backup powered by a 12v high-performance battery. This enables your sump pump to keep pumping even if the power goes out.
How can I tell if my sump pump is operational?
The first thing you should do is clear any debris from the exterior drain pipe. You want to make sure it’s diverting water away from your foundation. Next, check the power and hear if the motor is running.
Pour a bucket of water into this area to activate the pump’s automatic start, and the water should drain quickly once the pump is activated. If the pump does not start or is empty, it is time to have it serviced.
Do I still need a sump pump if I install gutters on my home?
In some cases, gutters installed on a home can divert water that would otherwise end up in the basement. However, this is not a sure thing.
What causes sump pumps to fail?
Your sump pump will frequently fail as a result of being overloaded. For example, if you have an event that causes your basement to flood, a single sump pump might not be reliable or powerful enough to handle the large volume of water that comes in. Check to ensure that the sump pump is getting enough voltage and that it isn’t connected to an extension cord or an outlet that shares a circuit breaker with other items.
It can also fail because of the clogged sump pumps and switches and frozen or clogged lines.
A sump pump is intended to transport clear, clean groundwater. However, if your sump pump is attached to a water softener or laundry machine, it may cause corrosion on the device’s seals, screws, or motor shaft. Laundry lint can also contribute by accumulating and clogging the pump.
