Search
Close this search box.

Foundation Jacks by HydroHelp911

Table of Contents

If you have sagging floors on your main floor and a crawl space beneath them, it is time to get your crawl space or basement inspected. When you move over the area, you may observe noticeable sagging, gaps between your walls and floor, or creaking.

Foundation jacks are often used to repair your home’s structure beneath your sagging floors. These jacks are the best in the industry and will return your family to a safe and secure living environment in your home!

Various issues can trigger foundation damage. It is essential to examine your home for signs of foundation damage regularly. Have you discovered any damage to your home’s foundation and believe it requires foundation repair? If this is the case, various foundation stabilization methods are available.

Some techniques are more effective than others. For example, concrete is a popular choice for some because it is less expensive than steel. While it is less costly, concrete is a poor choice that does not solve the problem. Concrete tends to shift, which will cause additional problems for your foundation in the future.

To securely hold your foundation, we use patented steel foundation jacks that go deep down past the “area of influence” to a deep load-bearing layer of soil. In this article, we’ll learn about HydroHelp911’s foundation jacks.

The HydroHelp911 Foundation's Advantages

Foundation jack installation professionals recommend the foundations’ stabilizer system at HydroHelp911. This is since this system addresses the most likely issues causing sinking in your crawl space. It lifts and stabilizes beams in your crawl space in a way that no other product can.

Consider the following advantages if you’re not sure why you should choose the foundation stabilizer system over foundation jacks.

  • Adjustable

This is a significant advantage of the foundation jack system over other available solutions. If the home settles further or you have increased settling issues, you can undoubtedly alter the foundation jacks, which concrete stabilizers cannot do.

Foundation jacks are not only adjustable, but once adjusted, they will remain in that position. The foundation stabilization system will ensure that your home receives the necessary support, whether it remains in its current state or settles further in the future.

  • High-Capacity

You want to ensure that you have something to sustain your foundation, in addition to having your system lift things back into place. That is why foundation lifting jacks are essential. If your foundation has recently begun to sink significantly, you need a solution that can raise it high enough to restore it to its original position.

This is where foundation jacks come in. Our crawl space support system is tested and proven to the highest quality standards and has a legal load capacity of more than 24,000 pounds per support jack. You don’t have to worry as to whether or not your foundation floor jacks are up to the job with this massive capacity.

  • Solution to Weak Soil

What if your foundation is built on shaky ground? The foundation jack system takes care of this as well. Instead of relying solely on the weak soil you already have, you can substitute it with a more robust option. Homeowners don’t have to worry about soft soil when depending on something improved with this highly designed fill.

This is significant because other solutions do not address the potential problem of weak soil. If you have an issue with soft soil, your foundation jacks must account for it. You’ll be better prepared to address the issue of further settling due to poor foundational support if you use a weak soil solution, such as the foundation jacks.

  • A Long-Term Solution

Provisional house foundation jacks can exacerbate the problem because they are ineffective. Instead, they applied a bandage to the problem. Meanwhile, the situation will worsen, making it difficult to sustain your foundation over time.

Instead, foundation jack provides a long-term solution that is simpler to manage and maintain. You can adjust it to meet your current and future needs, and its resilience ensures that you won’t have to worry about anything in the future.

Meanwhile, see Hydrostatic Pressure! Get a First-Hand View of What That Is.

HydroHelp911's Foundation Jack Installation Process

  1. The foundation jack installation crew clears any dirt or particles that could obstruct the work. To take on a crawl space jack installation project, we will need 2 feet of clearance to ensure sufficient room to maneuver.
  2. The team will then dig 18 inches by 18 inches wide and 12 inches deep to prepare the padded base.
  3. Our foundation stabilization experts will fill and compact the excavation with gravel, leveling it to install the pad directly beneath the girder beam.
  4. The gravel helps to balance the weight into the soil. Because the pads are one square foot, the load would be focused on one square foot of soil even without gravel.
  5. The team will then measure the distance between the precast pad and the girder beam and snip the 3.5″ pipe to fit.
  6. The foundation jack installation professionals assemble all foundation jack elements and safeguard the entire jack to the pad.
  7. Even before the lift, all of the foundation jacks are installed. The jacks are usually placed 6 feet apart at girder beam joints. Major joints must be supported to support both sides of the girder beam and level – not a notch up or down.
  8. We lift each jack a little at a time during the lift to ensure that no single jack bears the majority of the load.

Before the jacks can be installed, push piers or helical piers may be required to resolve foundation settlement. Furthermore, rotten girder beam sections must be replaced on occasion.

FAQs

What are the symptoms of interior and exterior foundation issues?

Kneeled walls, open spaces around the windows and window frames, protruding doors, broken sheetrock, and uneven or shaky floors are symptoms of interior and exterior foundation problems. Look for cracking bricks, blocks, and mortar that form horizontal, vertical, or stair step-like rifts in your structure. All of these are indications of a problem with your footing. Cracks in foundation walls commonly occur at the weakest areas, such as edges, window frame corners, service openings (such as HVAC systems), concrete cold joints, long spans of walls, pipe penetration, and along tie rods in the foundation.

What factors contribute to foundation issues?

Foundation issues can arise from various sources, affecting both new and older homes. With wet and dry cycles, seasonal weather patterns cause changes in the soil bed beneath the foundation of a home. Expansive clays shrink and swell. Hence, they are cracking the concrete footings and causing settlement issues. Substantial tree roots can drink water close to the foundation and endanger the structure by growing under bases. Poor drainage, insufficient or missing rebar, incorrect rebar placement, soil compaction, poor soil quality, and plumbing leaks are other causes of foundation problems.

What methods are used to repair shifting retaining walls?

Some soil around such a wall may be removed to allow the wall to be pulled back into place. A few drain lines can also prevent water from accumulating behind the walls. Hydraulic jacks and helical anchors pull the border back into place.

Anchors are screwed into the ground and pushed deeper with helical plates welded to pier shafts. When they reach stable soil, a bracket will be attached to a pier. The wall will be jacked into place, and the frame will be firmly affixed.

How can an uneven and bouncy floor be leveled and firmed up?

Small floor joists were commonly used in older homes. Floors with such joists are bouncy. The base may become uneven due to the settlement of the foundation floor or the beam frame.

An expert can resolve these settlement issues. Bouncy floors can be firmed up by jacking the dipped section of the floor and affixing larger joists to the undersized ones.

What exactly is underpinning?

This foundation repair procedure implies installing steel piers adjacent to or below foundation elements that have shifted or settled, such as footings, slabs, or walls. Piering is another term for this procedure. It aids in the stabilization of a shifted foundation caused by unstable soil.

Piers are driven deep into the ground until they reach stable soil or bedrock. To connect the foundation to the piers, steel brackets are used. Underpinning entails installing grade beams or footings to improve it.

What exactly is foundation pile or pier driving?

Piers and piles are terms that describe tubes, pillars, or posts that are pressed into the earth beneath a foundation to stabilize or reinforce it.

When the soil conditions are no longer suitable for supporting the structure, piles are used. Helical piers and giant spike piers are the two most common piles or piers used. Both are made of corrosion-resistant steel.

Contact HydroHelp911 Today!

HydroHelp911 will do everything we can to ensure your experience with us is excellent.

End of the Year Sale

Fill out this form to save $500 off now through Jan. 31st

"*" indicates required fields

I need help with :

By providing your mobile number on the submitted form, you grant HydroHelp911 permission to send you SMS messages for communication and updates regarding our products and services. SMS messages may include but are not limited to: Important service notifications | Scheduling reminders and changes. Standard messaging and data rates may apply. You can opt out of receiving SMS messages at any time by replying with “STOP” to any message. We respect your privacy and will not share your information with any third parties.

CHECK OUT RECENT POST

Do You Have Basement or Crawl Space Questions?

If you reside in North Carolina and need a highly skilled foundation repair, basement waterproofing or crawl space repair company, look no further! HydroHelp911 is ready to restore the life of your basement or crawl space!